Aprés pas mal de recherches, je peux répondre à ma question. Cela peut intéresser certains s'ils veulent vérifier leurs mesures :
1.7 Distributors--
022 905 205 A + B
Start at 100-130 mm Hg
End at 190 mm Hg, @ 12-15 deg Advanced
Start at 60-100 mm Hg
End at 150 mm Hg, @ 8-10 deg Retarded
022 905 205 D
Start at 100-130 mm Hg
End at 200 mm Hg, @ 11-14 deg Advanced
Start at 60-100 mm Hg
End at 150 mm Hg, @ 8-12 deg Retarded
022 905 205 E + F
Start at 100-130 mm Hg
End at 200 mm Hg, @ 11-14 deg Advanced
Start at 60-100 mm Hg
End at 150 mm Hg, @ 8-12 deg Retarded
022 905 205 J
Start at 100-130 mm Hg
End at 180-200 mm Hg, @ 11-13 deg Advanced
(no listing for retard on this one; could be an error)
1.8 Distributors-- (NOTE: Cannot be used with D-jetronic FI)
022 905 205 AA
Start at 90-120 mm Hg
End at 180-200 mm Hg, @ 9-12 deg Advanced
Start at 55-120 mm Hg
End at 145-190 mm Hg, @ (no angle specified) Retarded
022 905 205 AB
(No advance specified)
Start at 55-120 mm Hg
End at 145-190 mm Hg, @ (no angle specified) Retarded
2.0 Distributors--
039 905 205
Start at 100-130 mm Hg
End at 145-165 mm Hg, @ 6-8 deg Advanced
Start at 60-100 mm Hg
End at 148-158 mm Hg, @ 8-12 deg Retarded
039 905 205 A
Start at 30-130 mm Hg
End at 190-205 mm Hg, @ 5.5-7 deg Advanced
Start at 30-130 mm Hg
End at 150-160 mm Hg, @ 8.5-12.5 deg Retarded
(no part number given; taken from graph)
Start at 100-115 mm Hg
End at 120-135 mm Hg, @ 6-8 deg Advanced
Start at 80-100 mm Hg
End at 120-130 mm Hg, @ 8-12 deg Retarded
Voilà, ces valeurs m'ont beaucoup aidé. J'espère qu'elles vous aidront également
